FRONT PANEL

1. ON/OFF Power supply switch.

2. POWER If there is insufficient voltage, the LED does not light up.

3. SPEAKER Speakon® socket:
1+, 1- loudspeaker output
2+, 2- control signal input.
(This output is linked with the rear speaker output for fixed applications)

4. LIMIT Audio signal attenuation display. In the case where a control signal error occurs, the display lights up permanently and the audio signal is attenuated.

5. LEVEL Output level control.

6. FRONT INPUT XLR symmetrical input:
1 = ground
2 = in phase signal
3 = off phase signal
(This input is mixed with the rear input for fixed or special applications)

7. LINK Output connected in parallel with the input when bi-amplification is used; this output must be connected to the input signal of the second channel.

8. DRAWER The plug-in circuit contains the filtering, phase control and gain calibration functions. The selected loudspeaker model is indicated on the front panel along with the selected bandwidth and left-right and low-high functions.The drawer is maintained in place by a single screw to facilitate any changes.

©2000 RELEC SA